Skip to content

Custom Mural Wallpaper Installed in Hillsboro Beach

The short answer

Murals in Hillsboro Beach homes work well in guest rooms, dining areas, kids' rooms and dens. The keys are sizing the image to the exact wall, keeping the focal point visible above furniture, and choosing a pasted material that tolerates coastal humidity.

Some rooms call for more than a pattern. A guest suite that should feel like a getaway, a dining area that needs a conversation piece, a child's room built around a favorite theme, a home gym that could use a horizon to look at: these are the spots where a printed mural earns its place. Creative Wallpaper Installer is roughly two miles northwest of Hillsboro Beach in Pompano Beach, and we install digitally printed and hand-painted-style mural wallpapers in homes across this small Broward County community. Rather than repeating the general steps of hanging wallpaper, this page focuses on choosing a mural for a particular room and avoiding the mistakes that are unique to large single-image prints.

Matching the mural to the room

Each room puts different demands on the image. Thinking about how the space is used helps narrow the choices quickly.

  • Guest suites: calm landscapes, soft tropical foliage or misty seascapes that feel restful at night.
  • Dining rooms: a scenic or chinoiserie-style panorama gives guests something to look at and works well under a chandelier.
  • Children's rooms: maps, animals or illustrated scenes on a washable vinyl base that can be replaced as tastes change.
  • Home offices: an abstract or architectural image behind the desk that looks good on video calls.
  • Gyms and media rooms: bold, high-contrast imagery in rooms without a view to compete with.

Common mural mistakes and how we avoid them

The most frequent problem is a focal point hidden behind furniture. A beautiful sunset is wasted if the sun lands behind a headboard. Before you order, we mark the furniture outline on the wall and show you where the key elements of the image will fall.

The second is ordering to the wrong size. Murals are printed to dimensions, and walls are rarely perfectly square. We measure at several heights and widths and tell you how much bleed to add so we can trim the image to the real edges.

The third is choosing peel-and-stick for a humid room. Self-adhesive products can work in dry interiors, but in a Hillsboro Beach home where sliders open to the ocean breeze, a pasted mural on a non-woven or vinyl base holds much better.

Preparing for a large image

A mural covering an entire wall reveals every dent and seam underneath. We repair the wall, sand it smooth and apply a primer suited to wallcoverings, tinted if the mural has large pale areas that could show a darker wall color behind them. Outlets and switches are mapped so the cutouts can be planned around important details in the image.

Exterior-facing walls are checked for moisture. In summer, warm, humid outdoor air meeting a cool interior can create dampness inside walls, and that must be addressed before anything is hung.

Material and finish choices for a seaside wall

Mural printers usually offer three or four substrates, and the right one depends on the room more than the image. A non-woven base is light, stable and comes off the wall in sheets when you want a change, which suits bedrooms, offices and dining rooms. Vinyl-coated and heavier commercial vinyl bases are scrubbable, so they make sense in kids' rooms, playrooms, hallways that see suitcases and beach bags go by, and any wall near a kitchen. Fabric-textured and canvas-look bases add depth to painterly images but show wall flaws more readily, so the surface underneath must be very smooth.

Finish affects how the picture reads in Hillsboro Beach light. Matte finishes cut glare from big windows and hide small surface irregularities. Satin and pearl finishes make photographic images pop but reflect more light, which can wash out part of the scene if the wall faces the ocean. When you are comparing options, ask the printer for a small sample of the actual base and finish and tape it to the wall for a day; we are happy to look at it with you and point out anything that could cause trouble once the full mural is up.

Hanging day, panel by panel

We lay all the panels out in sequence and confirm the image matches the plan. The first panel is set to a plumb line, because any tilt there carries across the entire mural. Each following panel is matched to the image on the previous one, smoothed and checked before the next goes up. Trimming happens at the end so we can adjust for any irregularities in ceiling or floor lines. Most single-wall murals are done in a day.

Afterward, we reinstall plates, clean the space and talk you through care. Vinyl murals can be wiped gently; non-woven and textured murals should only be dusted. We install murals in Lighthouse Point, Lauderdale-by-the-Sea and Deerfield Beach as well.

More services in Hillsboro Beach

Related

What to expect

How a visit goes

  1. Clear scope before work begins

    After measuring and checking the walls, we explain what prep is needed, how many rolls to order and how long the job should take.

  2. Patterns that line up

    We plan seam placement around windows, doors and corners so repeats stay aligned from one strip to the next across the whole room.

  3. Respect for your home

    Drop cloths go down first, paste is wiped off trim as we go, and we leave the room ready to use at the end of each day.

FAQ

Common questions

Don’t see your question? Call (561) 823-3201 and we’ll talk it through.

How do I choose the right size mural?

We measure your wall in several places and give you exact dimensions plus the bleed to add, so the printer can size it correctly.

Can a mural be placed behind a bed or sofa?

Yes, but plan the image so its focal point sits above the furniture. We mark the outline on the wall before you order.

Which mural material is right for a beach home?

Pasted non-woven or vinyl murals tolerate humidity better than peel-and-stick versions.

Can a mural go in a child's room?

Yes. A washable vinyl base holds up to wear and can be replaced later when the child outgrows the theme.

How long does a mural installation take?

Most single walls take one day once the wall has been prepared.

Can you install a mural I bought online?

Yes. Send us the product details and we can confirm sizing and material before you order.

Ready to talk about your walls?

Tell us which room you are thinking about, where you live and what paper you have in mind. We will set up a visit to measure and look at the surface.

Request Service Call (561) 823-3201
Call (561) 823-3201 Request Service